Electric Motor
Thermal (Overload) Motor Relay Protection
The majority of winding failures in motor are either indirectly or directly caused by overloading (either prolonged or cyclic), operation on unbalanced supply voltage, or single phasing, which all lead through excessive heating to the deterioration of the winding insulation… Read more
Jul 14, 2012 | By Edvard Csanyi
Low Voltage
Assemblies of switchgear and control panels (3)
Continued from 2nd part of article: Assemblies of switchgear and control panels (part 2) Now coverage of distribution panels and switchboards will be presented including molded case circuit breakers (MCCB), safety switches, panelboards, multimetering equipment, ground fault circuit interrupters. Most of the… Read more
Jun 30, 2012 | By Edvard Csanyi
Energy and Power
220V DC system at thermal power station
The 220V DC system supplies direct current as source of operating power for control, signaling, relays, tripping and closing of switchgears, emergency motors of most important auxiliary systems. Under normal conditions of station generation, the storage battery units are kept… Read more
Feb 15, 2012 | By Bipul Raman
Electric Motor
AC motors – Protection against short circuits
Every electric motor has operating limits. Overshooting these limits will eventually destroy it and the systems it drives, the immediate effect being operating shutdown and losses. A short circuit is a direct contact between two points of different electric potential:… Read more
Jul 29, 2011 | By Edvard Csanyi
Biomass Energy
Typical applications of biomass
During Second World War the gasifiers were mainly employed for transportation purposes. However, in recent years the gasifiers have been employed mainly for stationary applications. For generating electricity, the producer gas from the biomass gasifier is first cleaned and cooled… Read more
Jun 26, 2011 | By Edvard Csanyi
Renewable Energy
Are renewable resources practical?
While few people disagree that renewable energy is a good idea, most also recognize there are two practical barriers to implementation on a wide scale. First, all renewable energy sources, except for hydro-electric power, cost from two to five times… Read more
Apr 01, 2011 | By Edvard Csanyi
