• 7 Lessons

## Symmetrical Components of Three-Phase Power Analysis and Fault Studies

Learn how to use the method of symmetrical components to simplify asymmetrical three-phase power analysis and understand fault studies and protection schemes. 7 lessons in 1h 30m total course length.

• 8 Lessons

## Per Unit Analysis for Single and Three-Phase Systems

Learn what Per Unit Analysis is and how manufacturers of electrical equipment use it to rate their equipment. Later, you will use it in your power flow, short circuit evaluation and motor starting studies. 10 lessons in 6h 5min total course length.

• 1 Lesson

## Fundamentals of Trigonometry for Electrical Engineering

This course takes you from the fundamentals of trigonometry to the more sophisticated operations required in electrical engineering. 10 sections, 3h 47min total course length.

• 8 Lessons

## Fundamentals of Instrument and Electric Power Metering in Utilities and Industry

Learn fundamentals of instrument and single-phase/three-phase metering in utilities and industry, digital & analog wattmeters, Kwhr meters. 8 lessons in 4h 7min total course length.

• 4 Lessons

## Power System Analysis Course: The Essentials of Load Flow and Short Circuits

Learn about power flow analysis and short circuit analysis of balanced and unbalanced faults to further your career in electrical and power engineering. Examples are solved to illustrate how to analyze real-world power systems. 4 sections, 37 lectures in 5h 48m total course length.

• 3 Lessons

## Power Engineering Course: Power System Stability

Learn about steady-state and transient stability of power systems and their importance in the safe and reliable operation of power systems.

• 3 Lessons

## MATLAB/Simulink Course: Power System Simulations (Load Flow, Short Circuit & Stability)

Learn how to simulate power systems in MATLAB/Simulink by building several Simulink power system models for load flow, short circuit, and power stability studies) and analyze the behavior of the system under several conditions.

• 3 Lessons

## Fundamentals of Power System Analysis: Single-Phase and Three-Phase Circuits

Learn the fundamentals of power system analysis: power analysis of single- and three-phase AC circuits, power triangle, complex power, and power flow, delta or wye connected loads and per-phase analysis of balanced loads. The course consists of 20 lectures in 2h 51m total length.

• 10 Lessons

## Fundamental Electric Circuits and Electronics Course for Beginner Engineers

Learn fundamentals of electric circuits and electronics, starting from the basics such as what an electric circuit is, electrical quantities like voltage, current & power, all the way to analyzing electric circuits.

• 24 Lessons

## The Essentials of Relay Protection and Control in Power Systems

Learn power system protection and control concepts, protection schemes and relays, primary & secondary equipment, and electrical wiring with practical examples. 85 lectures in 9h 11m total course length.

• 4 Lessons

## Course to Relay Circuitry and Understanding Control and Protection Schematics

This course covers basic to intermediate level and will teach you to properly understand relay circuitry and read and analyze control and protection schematics. 50 lectures in 8h 22m total course length.