Edvard Csanyi
1750 awesome technical articles
Hi, I'm an electrical engineer, programmer and founder of EEP - Electrical Engineering Portal. I worked twelve years at Schneider Electric in the position of technical support for low- and medium-voltage projects and the design of busbar trunking systems.
I'm highly specialized in the design of LV/MV switchgear and low-voltage, high-power busbar trunking (<6300A) in substations, commercial buildings and industry facilities. I'm also a professional in AutoCAD programming.
Biography: https://electrical-engineering-portal.com/edvard-csanyi
Energy and Power
Single line diagrams of emergency and standby power systems with automatic transfer switch (ATS)
Emergency and standby power systems are generally designed into the over-all electrical system for one of the following two reasons: Legal Requirements – As required by the NEC, NFPA 101, NFPA 99 and other local, state, and federal codes and requirements…. Read more
Feb 03, 2017 | By Edvard Csanyi
Electric Motor
Ladder logic for special motor control circuits – jogging and plugging
Ladder logic is often used to implement various motor control circuits. Beside standard motor control circuits, there are also special control circuits designed to allow jogging (brief energization of the motor to adjust its positioning) or to prevent plugging (sudden… Read more
Feb 01, 2017 | By Edvard Csanyi
Protection
The essentials of directional overcurrent protection in electrical power grid
Why do we use directional overcurrent protection? When does fault current direction become important? Well, electrical power grid comprises a network of power stations, substations and transmission lines. As well as the simple single-end-fed radial system, there are other more… Read more
Jan 30, 2017 | By Edvard Csanyi
Electric Motor
The influence of voltage unbalance on NEMA motor performance
Voltage unbalance can be more detrimental than voltage variation to motor performance and motor life. When the line voltages applied to a polyphase induction motor are not equal in magnitude and phase angle, unbalanced currents in the stator windings will… Read more
Jan 27, 2017 | By Edvard Csanyi
Maintenance
Transformer exterior inspection and tests you MUST perform periodically
Periodic transformer exterior inspection (visual) reveals important condition information. For example, valves positioned incorrectly, plugged radiators, stuck temperature indicator and level gauges, and noisy oil pumps or fans. Oil leaks can often be seen which indicate a potential for oil… Read more
Jan 25, 2017 | By Edvard Csanyi
Energy and Power
Twelve golden rules for specifying and implementing a good SCADA system
A successful SCADA specification and good installation depend on choosing and utilizing proven and reliable technology, with adequate and comprehensive training of all personnel in the operation of the system. Whilst one should rightly anticipate significant development and maintenance savings by… Read more
Jan 23, 2017 | By Edvard Csanyi
Energy and Power
4 example calculations of compensation for reactive power
First, let’s say some words about basics of the reactive power in system. Reactive current arises in every electrical system. Not only large loads, but smaller loads as well require reactive power. Generators and motors produce reactive power, which causes unnecessary… Read more
Jan 20, 2017 | By Edvard Csanyi
Industrial Automation
Considerations to take into account when designing PLC ladder logic
Motor control circuits are often implemented using ladder logic. It is so called because the schematic representation of the control circuit resembles a ladder with two vertical rails and a number of horizontal rungs, as shown in Figure 1. The… Read more
Jan 18, 2017 | By Edvard Csanyi
Protection
Commissioning of protection relays using test equipment and software
Commissioning and maintenance With numerical protection relays commissioning and maintenance has become far less complicated as a result of the information provided by the devices as well as the integrated self-monitoring. The information provided here is restricted to general notes… Read more
Jan 16, 2017 | By Edvard Csanyi
Electrical Lectures
Basic three phase power measurements explained in details
Although single-phase electricity is used to supply common domestic and office electrical appliances, three phase alternating current (a.c.) systems are almost universally used to distribute electrical power and to supply electricity directly to higher power equipment. This technical article describes… Read more
Jan 13, 2017 | By Edvard Csanyi
Power Substation
Four design criteria for human machine interface (HMI) in a substation
With the introduction of IEDs (Intelligent Electronic Devices), the traditional switchboard interface is being replaced by Human Machine Interface (HMI) software loaded on computer hardware. The designer has a wide choice of HMI vendors that support a wide range of… Read more
Jan 11, 2017 | By Edvard Csanyi
Cables
Specifying energy efficient motor, cabling and local power transformer
Many energy saving actions can encourage specifiers and engineers to look closely at the savings which can be made by specifying an energy efficient version of a particular component. This technical article presents the case for taking the important step… Read more
Jan 09, 2017 | By Edvard Csanyi
Energy and Power
31 practical do’s and don’ts to avoid loud transformer humming
The user thinking of loud transformer humming (practically noise) should start at the conceptual stage. If he can, he must consider if he has a noise problem before he specifies his transformer. If he does, a noise survey including frequency… Read more
Jan 06, 2017 | By Edvard Csanyi
Energy and Power
Selection of distribution transformers for supplying power to LV networks
The characteristic data of distribution transformers are determined by the requirements of the network. The effective power determined must be multiplied by the power factor cosφ to give the rated power SrT. In distribution networks the value uk= 6% is preferred…. Read more
Jan 04, 2017 | By Edvard Csanyi
Energy and Power
Respect Murphy’s Law and don’t remote control all systems via SCADA
Every technology has applications for which it seems admirably suited, other applications for which it seems only marginally suited, and a group of applications for which it simply should not be used. When a technology is very young, it is… Read more
Jan 02, 2017 | By Edvard Csanyi
