Get 15% OFF on Pro Premium Plan with discount code: UX21M. Study specialized electrical engineering articles and papers in Low- and High-Voltage areas.

# AC motor selection and application guide

## Polyphase Or Single-Phase Motor?

A power system can be either single-phase or polyphase. Figure 1 illustrates single-phase power, which is most commonly found in homes, rural areas and in small commercial establishments.

A polyphase power system consists of 2 or more alternating currents of equal frequency and amplitude but offset from each other by a phase angle. Figure 2 illustrates a three-phase power system having phases A, B and C. Each phase is offset by 120 degrees, 360 degrees being the span of one complete cycle.

For motors, an advantage of three-phase power is simpler construction which requires less maintenance. Also, a more powerful machine can be built into a smaller frame and will generally operate at a higher efficiency than single-phase motors of the same rating.

## Motor Output Rating

### Speed

The speed at which an induction motor operates is dependent upon the input power frequency and the number of electrical magnetic poles for which the motor is wound.

The higher the frequency, the faster the motor runs. The more poles the motor has, the slower it runs.Â The speed of the rotating magnetic field in the stator is calledÂ synchronous speed.

To determine the synchronous speed of an induction motor, the following equation is used:

Actual full-load speed (the speed at which an induction motor will operate at nameplate rated load) will be less than synchronous speed. The difference between synchronous speed and full-load speed is called slip. Percent slip is defined as follows:

Induction motors are built having rated slip ranging from less than 5% to as much as 20%.

A motor with a slip of less than 5% is called a normal slip motor. Motors with a slip of 5% or more are used for applications requiring high starting torque (conveyor) and/or higher than normal slip (punch press) where, as the motor slows down, increased torque allows for flywheel energy release.

 Title: AC Motor Selection and Application Guide – General Electric Format: PDF Size: 282 KB Pages: 32 Download: Right here | Video Courses | Membership | Download Updates

1. rgvbhg
Oct 10, 2018

what is the full load speed

2. priya
Apr 30, 2015

Is it possible to run motor on direct 3phase supply without using any drive..
and if possible at what speed it will run

• Bernabe ocampo
Nov 22, 2017

its posible ,but the speed is fixed between the charge and motor , in this condition is absolutely necessary,
that motors work close to synchronous speed or your sleep must be nera to 5 per cent.
you must put a thermal protection ,put away the motor if the steady state ,current is more than 15 percent than nominal current-

Jan 08, 2015

All materis very help me in do my job, thank you very must

4. Raul Suarez
Dec 29, 2014

I want to fit the EEP portal. Greetings.

5. ben manesh
Dec 29, 2014

I have a question for you: What if speed of induction motor reaches synchronous motor?

• senthil kumar
Jan 01, 2015

Hi Ben
Induction motor never rotate in synchronous speed, I hope that U know about slip, induction motor reach the synchronous speed means the slip is zero,if slip is zero means induction motor speed also zero.but it not possible induction motor catch the synchronous speed

• Bernabe ocampo
Nov 22, 2017

the motor never workh a synchronous speed because in this position is not util because in this point the par developed its theoretical null.
the most near situation at the synchronics speed,is when you put i on the motor without charge ,then the energy that motor is wasting es the necessary only for the loos –

• Bernabe ocampo
Nov 22, 2017

not speed is zero the par or torque es null for synchronous speed.and the motor left the utility-

• Vishwas
Mar 09, 2017

Not possible,induction motor never run on synchronous speed

### Electrical Engineering Courses

Learn to design electrical power and industrial automation systems through professional video courses.