Search

Premium Membership ♕

Limited Time Offer: Save 15% on PRO Plan with discount code: LRN15 and study specialized LV/MV/HV technical articles and studies.

Residential Power Distribution

Power distribution systems are used in every residential, commercial buildings and industrial fascilities to safely control the distribution of electrical power throughout the facility.

The Basics of Panelboards For Electrical Engineers (Beginners)
The Basics of Panelboards For Electrical Engineers (Beginners)

Most of us are familiar with the power distribution system found in the average home. Power, purchased from a utility company, enters the house through a metering device. The power is then distributed from a load center to various branch circuits for lighting, appliances, and electrical outlets.


Commercial and Industrial Power distribution

Power distribution systems used in multi-family, commercial, and industrial facilities are more complex. A power distribution system consists of metering devices to measure power consumption, main and branch disconnects, protective devices, switching devices to start and stop power flow, conductors, and transformers. Power may be distributed through various switchboards, transformers, and panelboards.

Good distribution systems don’t just happen. Careful engineering is required so that the distribution system safely and efficiently supplies adequate electric service to existing loads and has expansion capacity for possible future loads.


Panelboard Definition

The National Electrical Code® (NEC®) defines a panelboard as a single panel or group of panel units designed for assembly in the form of a single panel, including buses and automatic overcurrent devices, and equipped with or without switches for the control of light, heat, or power circuits; designed to be placed in a cabinet or cutout box placed in or against a wall, partition, or other support; and accessible only from the front (Article 1 00-Definitions).

In summary, according to the NEC® definition, panelboards are:

  • Used to control light, heat, or power circuits
  • Placed in a cabinet or cutout box
  • Mounted in or against a wall
  • Accessible only from the front

For additional information, refer to National Electrical Code® Article 408, Switchboards and Panelboards. Panelboards are frequently divided into two categories:

  • Lighting and appliance branch-circuit panelboards
  • Power panelboards (also called distribution panelboards)

Prior to the publication of the National Electrical Code®, the distinction between these two panelboard types was described in Articles 408.34 and 408.35. These articles have been removed from the 2008 code. However, it will take time for the industry to adapt to this change. Therefore, Articles 408.34 and 408.35 of the 2005 National Electrical Code® still warrant discussion.

Title:Basics of Panelboards – SIEMENS
Format:PDF
Size:3.6 MB
Pages:76
Download:Right here | Video Courses | Membership | Download Updates
Basics of Panelboards - SIEMENS
Basics of Panelboards – SIEMENS

Premium Membership

Get access to premium HV/MV/LV technical articles, advanced electrical engineering guides, papers, and much more! It will help you to shape up your technical skills in your everyday life as an electrical engineer.
50% Discount 💥 - Save 50% on all 90+ video courses with Enterprise Membership plan.

More Information

4 Comments


  1. XAVIER THANKARAJ
    Oct 02, 2016

    RESPECTED SIR,
    I HVE DOUBT IN LV MV HV .I NEED CLARIFICATION BELOW MENTIONED ITEM WHICHEVER ITEM WILL BE IN LV SWITCH GEAR AND WHICH ONE WILL BE ADD IN MV SWITCH GEAR, WHICH ONE WILL BE ADD HV SWITCH GEAR
    LV PANELS, MCC, CONTROL
    PANEL, DISTRIBUTION
    BOARDS, SWITCHGEAR
    COMPONENTS
    Capaciter Bank

    11 KV Switchgear


    • PRAKASH BHATT
      Dec 30, 2023

      11KV to 33kv Panels are called MV (medium voltage)
      415V panels ” (Low voltage)
      above 33KV panels are called HV


  2. gowtham42
    Jan 18, 2013

    thank u so much sir….plz keep posting new articles…


  3. Kittu
    May 05, 2012

    Thank you.

Leave a Reply to gowtham42

Tell us what you're thinking. We care about your opinion! Please keep in mind that comments are moderated and rel="nofollow" is in use. So, please do not use a spammy keyword or a domain as your name, or it will be deleted. Let's have a professional and meaningful conversation instead. Thanks for dropping by!

  −  1  =  eight

Learn How to Design Power Systems

Learn to design LV/MV/HV power systems through professional video courses. Lifetime access. Enjoy learning!

Subscribe to Weekly Newsletter

Subscribe to our Weekly Digest newsletter and receive free updates on new technical articles, video courses and guides (PDF).
EEP Academy Courses - A hand crafted cutting-edge electrical engineering knowledge