Energy and Power
Grounding systems and their 3-letter classification
Low voltage systems supplying to consumer premises are predominantly solidly grounded. Protective ground connection to consumer premises (or extending the supply system ground to consumer premises) is however done in different ways. The common system categories are defined below using a 3-letter… Read more
Apr 12, 2013 | By Edvard Csanyi
Energy and Power
An overview of GFCI – Ground-fault circuit interrupter
The NEC requires that Ground-Fault Circuit Interrupters (GFCIs) be installed in many different rooms and locations in both public and private buildings. They are now required in bathrooms, kitchens, appliance rooms or spaces, and garages. In addition, they are required… Read more
Apr 10, 2013 | By Edvard Csanyi
Power Substation
Steps to Ensure Effective Substation Grounding (Part 2)
Continued from previous article: Steps to Ensure Effective Substation Grounding (1) In previous technical article (part 1) was explained first five steps that will ensure a reliable, safe and trouble-free substation grounding system. Here we will explain the last six steps:… Read more
Nov 10, 2012 | By Edvard Csanyi
Power Substation
Steps to ensure effective substation grounding (Part 1)
An electrical substation is a critical resource in a power system. Safe operation of a substation calls for a properly designed and installed grounding system. A well-designed grounding system will ensure reliable performance of the substation over its entire service life. How does… Read more
Nov 09, 2012 | By Edvard Csanyi
Energy and Power
What is the difference between Bonding, Grounding and Earthing?
One of the most misunderstood and confused concept is difference between Bonding, Grounding and Earthing. Bonding is more clear word compare to Grounding and Earthing, but there is a micro difference between Grounding and Earthing. Earthing and Grounding are actually… Read more
Sep 27, 2012 | By Jignesh Parmar
High Voltage
Design of Overhead Transmission Line Foundation
The foundation is the name given to the system which transfers to the ground the various steady state (dead) and variable (live) loads developed by the transmission tower and conductors. Foundations may be variously subjected to compressive or bearing forces,… Read more
Sep 19, 2012 | By Edvard Csanyi
Transformers
Purpose of Shielded Isolation Transformer
A shielded transformer is a two-winding transformer, usually delta–star connected and serves the following purposes: – Voltage transformation from the distribution voltage to the equipment’s utilization voltage. – Converting a 3-wire input power to a 4-wire output thereby deriving a separate stable… Read more
Aug 29, 2012 | By Edvard Csanyi
Energy and Power
What is a Floating Neutral and how does it affect the power distribution
If the Neutral Conductor is opened, broke or lost at either of its source side (distribution transformer, generator) or at load side (distribution panel of a consumer), the distribution system’s neutral conductor will “float” or lose its reference ground Point…. Read more
Aug 27, 2012 | By Jignesh Parmar
Energy and Power
High resistance grounding equipment in mining applications
High resistance grounding equipment or permanently installed electrical distribution systems used in mines should be selected and applied as recommended for process industries. When mobile equipment is connected to the distribution system the grounding equipment and the ground fault protection should be designed… Read more
Aug 22, 2012 | By Edvard Csanyi
Electrical Lectures
Electric Shock Current, Where Does It Go?
As we’ve already know, electricity requires a complete path (circuit) to continuously flow. This is why the shock received from static electricity is only a momentary jolt: the flow of electrons is necessarily brief when static charges are equalized between… Read more
Aug 13, 2012 | By Edvard Csanyi
Cables
Mark the ground with an X and say Dig Here!
No matter what method is used for fault locating on direct buried underground cable, at some point an “x” must be marked on the ground to say “dig here.” The most commonly used prelocation methods such as arc reflection or… Read more
Jul 18, 2012 | By Edvard Csanyi
Low Voltage
Assemblies of switchgear and control panels (3)
Continued from 2nd part of article: Assemblies of switchgear and control panels (part 2) Now coverage of distribution panels and switchboards will be presented including molded case circuit breakers (MCCB), safety switches, panelboards, multimetering equipment, ground fault circuit interrupters. Most of the… Read more
Jun 30, 2012 | By Edvard Csanyi
Metering
Analog Data Acquisition with Transducers
Transducers measure power system parameters by sampling instrument transformer secondaries. They provide a scaled, low-energy signal that represents a power system quantity that the SA interface controller can easily accept. Transducers also isolate and buffer the SA interface controller from… Read more
Apr 19, 2012 | By Edvard Csanyi
Electrical Lectures
Earthing in electrical network – purpose, methods and measurement
The main reason for doing earthing in electrical network is for the safety. When all metallic parts in electrical equipment are grounded then if the insulation inside the equipment fails there are no dangerous voltages present in the equipment case…. Read more
Dec 19, 2011 | By Jignesh Parmar
Energy and Power
Installation of Distribution-to-Utilization Voltage Transformers
Aerial transformer installations may utilize a three-phase unit or banked single-phase units. Transformers, either singly or in banks, having an individual unit or combined capacity greater than 300 kVA will not be mounted on single wood poles. Special structural considerations… Read more
Nov 11, 2011 | By Edvard Csanyi
