EEP Academy
InstructorINTRODUCTION
EEP Academy is an online school dedicated to the education of electrical engineers worldwide. Our courses provide all the cutting-edge hand-crafted Electrical Engineering knowledge, based on the 15+ years of practice of our instructors, experienced electrical engineers.
Education
COURSES
Power System Modeling and Stability Analysis Using ETAP – Beginner to Advance Level Course
Learn how to perform power system modeling and power system stability analysis using ETAP. The course covers generator dynamics & transient stability analysis, synchronism of generating sources, and many other important lessons. 23 lectures in 3h 35m total course length.
ETAP Dynamic and Static Motor Acceleration Analysis and Starting Methods
Learn the fundamentals of induction motor dynamics, motor acceleration analysis, and motor starting methods (Autotransformer, Star-Delta) in ETAP software. 10 sections and 19 lectures in 3h 19m total course length.
Relay Protection Course: Implementation of Digital Logic and Schemes in Protective Relays
Learn how to implement protective relay logic and how to build logic schemes of enable/disable switches, permissive tripping, overcurrent blocking, breaker failure, and automatic reclosing. The course consists of 13 lessons in 2h 16m total length.
ETAP Power System Protection and Coordination Analysis Course
Learn how to perform protection and coordination analysis of the electrical systems using ETAP software (overcurrent and earth fault protection, ring main system, voltage-dependent relay coordination, parallel multiple sources, etc.). 13 lessons in 3h 9m total course length.
ETAP Power System Design and Analysis Course For Solving Various Practical Problems
Learn power system modelling and analysis using ETAP software and its functionalities for successful design & solving various power system practical problems. Learn how to simulate and analyze the steady-state and dynamic power system. 29 topics in 8h 56m total course length.
Design Course for Busbar Protection Schemes in HV Substations
Learn how substation buses operate and how to implement different protective elements for their protection. Learn to design robust protection schemes to protect these components from faults and abnormal operating conditions. 2h 27m total course length.
Symmetrical Components Technique for Power System Protection and Control Engineers
Learn how to use symmetrical components - a very important mathematical technique used in power system protection and control for the easier analysis of power system faults. 25 lectures in 2h 48m total course length.
Advanced Analysis and Power Calculations of AC Electric Circuits
Learn everything about AC electric circuits and electronics, from the basics such as what sinusoids are, all the way to key characteristics of AC circuits such as impedance, admittance, power factor, complex power, and power calculations.
MATLAB/Simulink for Analog and Digital Electronics
Learn how to simulate any analog or digital electronics device in MATLAB/Simulink, including active low-pass & high-pass filters, audio equalizers, inverting & non-inverting amplifiers, analog-to-digital converters (ADCs), and digital-to-analog converters (DACs).
Power Electronics Masterclass Course: Rectifiers, DC-to-DC Converters, and Inverters
This course provides a complete overview of one of the main areas of electrical engineering and power engineering: rectifiers, DC-to-DC converters, and inverters. The course includes 25 lectures and 1 exam in 3h 43m total course length.
MATLAB-Simulink Course: Power Electronics Simulations
Learn how to simulate any power electronics device in MATLAB/Simulink, including rectifiers, DC-to-DC converters, and inverters (single-phase and three-phase). Course consists of 4 sections, 30 lectures in 6h 22m total course length.
Power System Analysis Course: The Essentials of Load Flow and Short Circuits
Learn about power flow analysis and short circuit analysis of balanced and unbalanced faults to further your career in electrical and power engineering. 4 sections, 37 lectures in 5h 48m total course length.
Power Engineering Course: Power System Stability
Learn about the steady-state and transient stability of power systems and their importance in the safe and reliable operation of power systems.
MATLAB/Simulink Course: Power System Simulations (Load Flow, Short Circuit & Stability)
Learn how to simulate power systems in MATLAB/Simulink by building several Simulink power system models for load flow, short circuit, and power stability studies) and analyze the behavior of the system under several conditions.
Power Engineering Course: Generators, Transformers and Transmission Lines
Learn about generators, transformers, and transmission lines and their use in power system analysis to further your career in electrical and power engineering. 35 lectures in 4h 36m total course length.
Fundamentals of Power System Analysis: Single-Phase and Three-Phase Circuits
Learn the fundamentals of power system analysis: power analysis in single- and three-phase AC circuits, power triangle, complex power, and power flow, delta or wye connected loads and per-phase analysis of balanced loads.
Fundamental Electric Circuits and Electronics Course for Beginner Engineers
Learn fundamentals of electric circuits and electronics, starting from the basics such as what an electric circuit is, electrical quantities like voltage, current & power, all the way to complex techniques for analyzing electric circuits.